Part 4 of : 7-digit seven segment display using ESP-12F IOT module through 32-bit serial-in parallel-out shift register module

Modules required

Reference blogs

ESP-12F IOT module programmer circuit and explanation : http://www.haberocean.com/2019/05/esp-12f-iot-module-programmer-circuit/

32-bit serial-in parallel-out shift register module using ESP-12F IOT module : http://www.haberocean.com/2019/05/32-bit-shift-register-module-using-esp-12f-iot-module/

Control the outputs of ESP-12F IOT module from android app : http://www.haberocean.com/2019/06/part-3-of-control-the-outputs-of-esp-12f-iot-module-from-an-android-app/

Video demonstration

Upload the following program to your ESP-12F IOT module.

Read More
Part 3 of : Control the outputs of ESP-12F IOT module from an Android APP

Upload the following program to ESP-12F IOT module. Before starting this, read my previous blog on the basics of programming ESP-12F IOT module.

#include <ESP8266WiFi.h#include <WiFiClient.h#ifndef APSSID #define APSSID "PaulESP" #define APPSK "paulsin91@" #endif // Variable to store the HTTP request String header; /* Set these to your desired credentials. */ const char *ssid = APSSID; const char *password = APPSK; int ledPin = 13; // GPIO13 WiFiServer server(80);
Read More
Part 2 of : 32-bit shift register module using ESP-12F IOT module

Important : In the ESP-12F IOT module, jumper should be placed across 5V and COM as encircled in the following image. Otherwise, high voltage may destroy your 32-bit shift register module.

In the previous blog, we saw the circuit for programming ESP-12F IOT module.

Product links

CP2102 USB 2.0 to TTL UART SERIAL CONVERTER : https://robu.in/product/cp-2102-6-pin/

ESP-12F IOT Module : 

Read More
Part 1 of : ESP-12F IOT Module Programmer circuit

Circuit is done as shown in the diagram.

Product links

CP2102 USB 2.0 to TTL UART SERIAL CONVERTER : https://robu.in/product/cp-2102-6-pin/

ESP-12F IOT Module : http://www.haberocean.com/product/iot-module-using-esp-12f/

Connect “CP2102 USB 2.0 to TTL UART serial converter” to your PC and turn on the DC power source. Open Arduino IDE. Open the Blink program from the Examples.

Read More
X